流量替代渗透率评价破碎性储层工作流体伤害程度

若地层岩石整体强度偏低,在力学环境改变后岩石易破碎成不规则破裂体,则储存油气资源的此类破碎地层被称为破碎性储层。由于破碎性储层在纵向上存在着较强的非均质性,通过测试单个柱塞岩样在工作流体伤害前后的渗透率变化难以体现工作流体对储层的整体伤害程度。为此,利用达西定律先从理论上探讨用流量替代渗透率定量表征储层伤害程度的可行性,再开展单层开采、双层及三层并采的流量测试实验,评价工作流体对单层、多层储层的整体伤害程度,并将流量损害率与渗透率损害率进行对比以求证流量替代渗透率的可行性。研究结果表明:①单层开采时,流量损害率与渗透率损害率基本一致,渗透率损害率是流量损害率的一种特殊形式;②双层及三层并采时,单层各自稳定流量损害率与渗透率损害率接近,且流量损害率可以定量表征并采储层的整体伤害程度,而渗透率损害率则无法定量表证;③稳定流量损害率较累积流量损害率更接近渗透率损害率。结论认为,测定稳定流量可以替代测定渗透率评价工作流体对破碎性储层的伤害程度,从而为优选工程技术与评价工作流体的适应性提供了方法依据。     

渤海海域莱州湾凹陷高硫稠油成因及其成藏模式

现今渤海海域仅在莱州湾凹陷发现了规模型高硫油油田，其原油性质复杂，来源及成因认识不清。在大量实验数据分析的基础之上，利用地球化学分析方法和盆地模拟手段对莱州湾凹陷各油田油气来源及成因做了详细研究，结果表明：①莱州湾凹陷主要发育了沙三段和沙四段两套有效的烃源岩，陡坡带和中央构造带上各构造原油主要来源于主洼沙四段烃源岩，缓坡带上各构造原油表现为主洼沙四段和南次洼沙四段双洼供烃的特征；②沙四段地层沉积时期存在水体分隔，南次洼水体更加咸化易形成富硫干酪根，其烃源岩分布范围控制着高硫油的分布范围，是高硫油形成的主控因素。而生物降解作用，一方面导致原油稠化是形成稠油的主要原因，另一方面使原油硫含量相对富集，是形成高硫油的重要因素；③垦利16-1油田具有晚期成藏的特点，形成了咸化湖盆早生、早排双洼供烃成藏模式，深、浅地层成藏模式不同，深部地层为典型不整合面侧向输导远源成藏模式。认为南次洼南部古近系地层和潜山优质储层是油气聚集的有利区带，可作为下一步油气勘探的有利方向。     

破碎围岩回采巷道锚网索支护参数优化

针对镇城底煤矿8"煤层工作面巷道围岩破碎、支护困难等问题,分析了原有巷道支护方式失效的原因,进而针对性的优化了巷道支护参数,采用①20 mm X 2500 mm左旋螺纹钢锚杆,①17.8 mm X 6500 mm锚索,并进行了验算。最后通过现场实测巷道顶板离层量得到有效的控制,实现了安全髙效开采。     

煤矿岩巷快速掘进技术的探讨

随着煤矿开采强度的增大,采掘接替紧张问题已经成为限制煤炭产量进一步提升的障碍。要想缓解采掘接替紧张的情况,就要实现巷道的快速掘进。虽然煤巷的快速掘进问题已经解决,但是,岩巷的快速掘进是难点。简要阐述了目前常用的几种岩巷掘进技术,在此基础上分析了实现岩巷快速掘进的方法,以期为采矿掘进技术人员日后工作的顺利进行提供参考。     

RESERVOIR PROPERTIES OF BARREMIAN – APTIAN URGONIAN LIMESTONES,SE FRANCE,PART 1: INFLUENCE OF STRUCTURAL HISTORY ON POROSITY-PERMEABILITY VARIATIONS

Upper Barremian – Lower Aptian inner platform “Urgonian” limestones in the Mont de Vaucluse region, SE France, consist of alternating metre-scale microporous and tight intervals. This paper focuses on the influence of structural deformation on the reservoir properties of the Urgonian limestone succession in a study area near the town of Rustrel. Petrographic, petrophysical and structural data were recovered from five fully-cored boreholes, from the walls of a 100 m long underground tunnel, and from a 50 m long transect at a nearby outcrop. The data allowed reservoir property variations in the Urgonian limestones to be studied from core to reservoir scale. Eleven Reservoir Rock Types (RRTs) were identified based on petrographic features (texture, grain size), reservoir properties (porosity, permeability), and the frequency of structural discontinuities such as fractures, faults and stylolites. Tight and microporous reservoir rock types were distinguished. Tight reservoir rock types were characterised by early cementation of intergranular pore spaces and by the presence of frequent structural discontinuities. By contrast microporous reservoir rock types contained preserved intragranular microporosity and matrix permeability, but had very few structural discontinuities. Observed vertical alternations of microporous and tight rock types are interpreted to have been controlled by the early diagenesis of the Urgonian carbonates. Deformation associated with regional-scale tectonic phases, including Albian – Cenomanian “Durancian” uplift (∼105 to 96 Ma) and Pyrenean compression (∼55 to 25 Ma), resulted in the modification of the initial petrophysical properties of the Urgonian limestones. An early diagenetic imprint conditioned both the intensity of structural deformations and the associated circulations of diagenetic and meteoric fluids. Evolution of the Reservoir Rock Types is therefore linked both to the depositional conditions and to subsequent phases of structural deformation.     

节理峰前剪切刚度软化模型及其影响因素分析

节理峰前剪切应力-位移曲线是研究节理剪切行为的重要内容。然而目前对于节理峰前剪切行为大多以线性描述,不能较好的描述非线性的特点。对于非线性的描述也仅仅是唯象描述剪切应力-位移曲线,未能反映影响模型的参数物理意义及影响因素。以峰前节理刚度软化行为为出发点,采用归一化的思想将节理剪切刚度与位移无量纲化,用双曲线函数表示出剪切刚度与位移之间的关系。提出了考虑刚度软化的峰前剪切本构关系,通过与试验结果对比验证了本构关系的合理性。影响该模型最重要的两个因素是初始剪切刚度与峰值剪切位移。以Greenwood和Williamson模型为基础在细观上探讨了初始剪切刚度的影响因素;抓住法向应力与节理粗糙度主要因素,探讨了影响峰值剪切位移的影响因素。对模型参数的研究有助于进一步阐明节理峰前剪切机理。     

An approach to measure infill matric suction of irregular infilled rock joints under constant normal stiffness shearing

Rock joints infilled with sediments can strongly influence the strength of rock mass. As infilled joints often exist under unsaturated condition, this study investigated the influence of matric suction of infill on the overall joint shear strength. A novel technique that allows direct measurement of matric suction of infill using high capacity tensiometers (HCTs) during direct shear of infilled joints under constant normal stiffness (CNS) is described. The CNS apparatus was modified to accommodate the HCT and the procedure is explained in detail. Joint specimens were simulated by gypsum plaster using three-dimensional (3D) printed surface moulds, and filled with kaolin and sand mixture prepared at different water contents. Shear behaviours of both planar infilled joints and rough joints having joint roughness coefficients (JRCs) of 8–10 and 18–20 with the ratios of infill thickness to asperity height (t/a) equal to 0.5 were investigated. Matric suction shows predominantly unimodal behaviour during shearing of both planar and rough joints, which is closely associated with the variation of unloading rate and volumetric changes of the infill material. As expected, two-peak behaviour was observed for the rough joints and both peaks increased with the increase of infill matric suction. The results suggest that the contribution of matric suction of infill on the joint peak normalised shear stress is relatively independent of the joint roughness.     

羊场湾煤矿软岩底板炉渣混凝土加固技术

为提高软岩底板强度而供无轨胶轮车等大型车辆行驶，结合羊场湾煤矿16206机巷软岩底板地质条件，研究了炉渣混凝土底板加固技术，确定了合理的配比方案，并对机巷现场进行混凝土地坪铺设应用。研究与应用结果表明：炉渣混凝土底板强度可满足大型车辆连续运输所需，极大地提高了底板承载能力，防止底鼓，为长距离巷道实现连续运输提供了基础保障。     

龙滩坝8#采场地压监测与结果分析

为掌握龙滩坝8#采场矿体在开采过程中地压的变化规律，在结合现场实际情况的同时，根据开挖揭露的地质条件，采用钻孔应力计、锚杆应力计、收敛计、多点位移计和声发射对采场矿柱、顶板及巷道变形情况进行监测，得到回采过程中矿柱、顶板、巷道的受力状况。掌握采场地压的变化规律，为矿体的开采设计提供参考。